Skip to Content

Swingover Euroclass 800


Swing over Euroclass 800

 

With the SwingOver EuroClass 800 milking parlor system, you get an innovative herringbone milking parlor that saves time and increases throughput without requiring a large investment.

The many benefits of the SwingOver EuroClass 800 milking parlor system include:

  • Increased throughput and yield.
  • Better ergonomics for the milker with shorter pathways, meaning the cow and the milking clusters can be reached easily.
  • Short hose lines and low strength vacuums for better udder health and high milk quality.
  • Low investment costs as the milking parlor components each serve two milking stalls.
  • Milking starts automatically when the PosiSwing milking arm swings out.

SwingOverEuroClass 800 milking parlor system: better ergonomics, higher throughput and low investment cost:

  • in the SwingOverEuroClass 800 milking parlor system, all of the milking parlor components can be found centrally above the milking pit. They are positioned to be right at your working height. So you save time as they are always nearby. The alternating process enables you to milk quickly and continuously, despite the low number of milking parlor components. The SwingOverEuroClass 800 milking parlor system optimizes your entire milking routine and increases efficiency with its intelligent design. As you only require a single milking control device and cluster for each stall, this milking parlor system is incredibly good value. You get an ergonomic and innovative herringbone milking parlor without having to make a huge investment. The system is available in different sizes to suit your needs and has space for from 2×4 to 2×32 animals.
  • for optimum control: the electronic milk management system from GEA The modular design of our solutions means that all of the components in the herringbone milking parlor are completely compatible with one other.

The electronics in the milking parlor assume control of the system, reducing your workload dramatically:

  • You can use the DemaTron or MetaTron milking control devices to control the entire milking process.
  • The gates can be opened and closed from any milking stall via the milking control device, meaning you no longer have to walk unnecessarily to the other gates.
  • The milking process beings automatically when the PosiSwing milking arm swings out, and is controlled using the milking control devices.
  • These are connected directly to the milking management system and provide you with important data to help you optimize your herd.

Get Quotation